duvet cover set sewing model 1

Duvet covers are a great way to add style and functionality to your bedding. They can protect your duvet insert from stains and wear, and they also allow you to easily change the look of your bedding without having to replace the entire duvet. If you love to sew, making your own duvet cover set can be a fun and rewarding project. In this article, we will provide a step-by-step guide on how to sew a duvet cover set using Model 1, a simple and versatile sewing pattern.

Materials Needed:
– Fabric for duvet cover (amount will vary based on the size of your duvet)
– Coordinating fabric for pillow shams (amount will vary based on the size of your pillows)
– Matching thread
– Duvet insert
– Scissors
– Sewing machine
– Iron
– Pins
– Measuring tape

Step 1: Measure Your Duvet
Start by measuring your duvet insert. You will need to know the length, width, and depth of your duvet in order to determine how much fabric you will need for your duvet cover. Add a few inches to the measurements to allow for seam allowances and a comfortable fit.

Step 2: Cut Your Fabric
Using your measurements, cut two pieces of fabric for the top and bottom of the duvet cover. The width of each piece should be the width of the duvet plus a few inches for seam allowances, and the length should be the length of the duvet plus a few inches. For example, if your duvet is 80 inches wide and 90 inches long, your fabric pieces should be around 84 inches by 94 inches.

Step 3: Sew the Duvet Cover
Place the two fabric pieces right sides together and pin along three sides, leaving one short side open. Sew along the pinned edges using a 1/2 inch seam allowance. Trim the corners to reduce bulk, then turn the duvet cover right side out.

Step 4: Add Closure
To close the open side of the duvet cover, you can use buttons, snaps, or a zipper. For Model 1, we will use buttons. Fold the raw edges of the open side inwards and topstitch along the edge. Sew buttonholes on one side and buttons on the other side to create a closure.

Step 5: Make Pillow Shams
To make pillow shams, cut two pieces of fabric for each sham. The width should be the width of the pillow plus a few inches for seam allowances, and the length should be the length of the pillow plus a few inches. Sew the pieces together, leaving one short side open. Turn the sham right side out and press. Add closure using the same method as the duvet cover.

Step 6: Finish
Insert your duvet into the duvet cover and place your pillows into the pillow shams. Your duvet cover set is now complete!

By following these steps, you can create a beautiful and custom duvet cover set using Model 1. Feel free to customize the design by using different fabrics, trims, or embellishments to suit your style. Sewing your own duvet cover set is a great way to add a personal touch to your bedding and showcase your sewing skills. Enjoy your new duvet cover set!