pillowcase sewing model 16

Pillowcases are a simple yet essential item in any bedroom. They not only protect your pillows from dirt and dust but also add a touch of style to your bedding. If you enjoy sewing and want to customize your pillowcases, then sewing model 16 is the perfect choice for you. In this article, we will discuss how to sew pillowcases using model 16, including the materials you will need and step-by-step instructions.

Materials needed:
– Fabric: You will need two pieces of fabric, each measuring 20×30 inches. Choose a soft and breathable fabric like cotton or linen for the best results.
– Matching thread
– Sewing machine
– Scissors
– Pins
– Iron

Instructions:
1. Cut your fabric: Start by cutting two pieces of fabric, each measuring 20×30 inches. These measurements are for a standard size pillowcase, but you can adjust the dimensions to fit your pillow if needed.

2. Place the fabric right sides together: Lay one piece of fabric right side up on your work surface. Then, place the second piece of fabric on top of it, right side down, aligning the edges.

3. Pin the fabric together: Pin the two pieces of fabric together along the sides and bottom edge, leaving the top edge open. This will be where you insert the pillow later on.

4. Sew the sides and bottom: Using a 1/2 inch seam allowance, sew along the sides and bottom edge of the fabric, removing the pins as you go. Be sure to backstitch at the beginning and end of each seam to secure the stitches.

5. Finish the edges: To prevent fraying, finish the raw edges of the fabric by either serging or zigzag stitching along the seams. You can also trim the seam allowance with pinking shears for a decorative edge.

6. Turn the pillowcase right side out: Reach inside the pillowcase and turn it right side out through the open top edge. Use a blunt object like a chopstick or pencil to push out the corners for a crisp finish.

7. Press the pillowcase: Use an iron to press the pillowcase, paying special attention to the seams and corners to ensure a smooth and professional-looking finish.

8. Insert the pillow: Finally, insert your pillow into the pillowcase through the open top edge. Fluff it up and adjust it to fit snugly inside the case.

Congratulations, you have successfully sewn a pillowcase using model 16! Feel free to experiment with different fabrics, trims, and embellishments to create unique and personalized pillowcases that match your bedroom decor. Whether you’re a beginner or an experienced sewer, sewing pillowcases is a fun and rewarding project that will add a personal touch to your bedding. Enjoy your new pillowcases and happy sewing!